Standalone access control, easy to install, easy to use. Fingprint reader response fast. Capacity: 1,000 fingerprints, 1,000 RF cardsIdentification Method: Fingerprint, ID card(125KHz)FAR/FRR: 0.0001%/0.1%Communications: RS485, USB, WiegandWith software to manage fingerprintPower:...

mifare1 card reader, read Card ID or sector,can used in access control and ELEVATOR control,proposal for hotel,building etc. JBC326 is one kind of Mifare1 IC reader which is used in elevator and access controller, it has 1 group of output cable to connect with controller, can transfer...

13.56MHZ with keypad standalone access control output WG26/34/66 RS485 communication SR326 is  an mifare 1 card reader with keypad . mainly used in access control or elevator .like hotal. high building .etc 1):  internal mifare card reader...

read 125KHz card, TCP/IP, can be time attendance or access control EM CARD READER TERMINAL 1) 2 TTL input2)2 relay output3)TCP/IP interface, 4 RS232- RS485 ports4)Support  EM Card(125KHZ)...

Main characteristics: 1) Built-in aerial, working frequency is 125KHz 2) Totally supports uem4100 Main characteristics:1) Built-in aerial, working frequency is 125KHz 2) Totally supports uem4100 compatible ID card (64bits, Manchestercode) 3) Effective distance: above 0-10cm 4) The...

Proximity Card reader,wiegand26 ,ABA TK2 interface,RS-485 125KHZ, read range 5-12cm,12V DC INPUT 13.5Mhz, mifare card options Operating instructions:When the card is close, the red light changes to green, blinks, then changes back to red. The same ID card will not be read when the...

Standalone Access Controller  1.Internal non-contact ID reader, reading distance: 5-15CM2.12 Keys keypad for open via password, one bell button3.Nonvaltile memory is used to store passwords, parameters and registration info4.Could register 248  user cards and...

Mifare 1 card reader/writer module ,support usb ,or wiegand26 port or rs-232 port or TTL interface ,used for access control ...

It's frequency is 125KHZ, reading code of ID card and outputing Wiegand26 signal, which is mainly used to access control. 1. frequency 125KHZ, Wiegan26 ouput 2. induction speed: ≤0.1S3. induction range: ≥5CM4. communication distance: could reach 100M 5. indicator...

read EM card(125Khz) and output Wiegand26/34, serial No. or ABA  1. frequency 125KHZ, Wiegan26/34 or ABA     2. induction speed: ≤0.1S3. induction range: ≥5CM4. communication distance: could reach 100M5. indicator light: red and green. When in...